Product Sheet Original Formula

THE MOST USED PAINT IN FIRE PROTECTION IN THE WORLD


Product Sheet Original Formula


Specifiestions

Technical data Original Formula


White color
Specific Gravity: 1.26
pH range: 8.0-8.5
Weight/Gallon: 10.5 lbs (4.8 kg)
Hazardous Ingredients: N/D Volume Solids: 52.0% (+/- 2%)
Solid Weight: 53.5% (+/- 2%)
Viscosity: 110 Kreb Units (+/- 10%)
Flammability: Not Flammable
VOC. (WITHOUT WATER): 0.01 Grams/liter (Nil)




performance


Contego is applied like any high quality latex paint. The use of special tools is not required. Original Formula can be applied by spray gun, roller or brush, virtually any standard thickness (2400 psi/x21 pointer).
Original Formula has a wide spectrum of applications as it is based on polymers that allow it to securely adhere to any substrate. It is not carcinogenic, does not irritate the skin, and is completely safe to use around children and pets. Do you want low VOC? How about no VOC to get LEED credits or just to use a green and safe product?

For most combustible substrates two coats (14 to 20 dry mils) provides similar protection to 80 to 120 mils of older generation intumescent products and because it is much thinner it is significantly lighter and more economical.

If fire is the problem... Contego is the Solution!


Data and Product Safety


Intumescent Latex Paint Contego Firebarrier Original Formula
Physical State...Viscous Liquid; aqueous emulsion
Vapor Density ... Less dense than air (Water Vapor)
Boiling Point ... 100°C (212°F)
Specific Gravity...1.29
Weight per unit volume (Lb/Gal) ... 10
VOC % by weight ... 1-2
Volatile percentage by weight ... 30-40 (water)
Evaporation rate...Same as water
Vapor Pressure ... 17.5 mm Hg at 20°C


Information | Pack Size


Contego products are available in 5 Gallon Pails, 55 Gallon Drums,
270 gallon containers and 4000 gallon tanks. Contego is also packaged in cans of
1 gallon with minimal extra cost.



Frequent questions HIGH SOLIDS ORIGINAL FORMULA

Free advice

Share by: